SeattleRecruiter
the smart solution for Seattle jobs

Aerospace Painter - Graveyard Shift

Company: Precision Castparts Corp.
Location: Kent
Posted on: December 6, 2017

Job Description:

Position Summary:
Level 4 candidates shall be experienced in the spray application of multiple functional and decorative aerospace primers and topcoats on a variety of substrates and on simple to complex product configurations, (geometries). Experience should extend to the application of spatter finish textures, dry-film lubricants, conductive coatings, intumescents and Teflon finish systems using conventional HVLP equipment in pressure, siphon and gravity fed variants. Additionally, these operators should be familiar with the setup and application of primers using conventional and airless ID equipment for coating the internal surfaces of structural tubing. Level 4 candidates must be adept at hand shooting and stenciling operations and must possess analytical skills for problem solving and trouble shooting. These operators will be expected to maintain terminal equipment in good working order throughout the production cycle. Level 4 candidates will be expected to control wet/dry film coating thicknesses IAW noted prescribed requirements. These individuals will typically be cross qualified in relevant support functions such as racking, turning, and sanding operations as well as equipment maintenance and paint mixing operations. As a condition of assignment, level 4 painter candidates may be expected to process product controlled under the International Traffic in Arms Regulations and/or Export Administration Regulations. As such these candidates may be required to provide proof of U.S. Citizenship, Legal Permanent Residence or protected status as a Non-Citizen National of the U.S.
Primary Duties & Responsibilities:
+ Reviewing and assimilating work instructions specific to paint type, dimensional tolerance and thickness considerations.
+ Loading, adjustment and light maintenance of conventional HVLP coating equipment in remote pressure, siphon and gravity fed variants.
+ Setup and operation of conventional and airless ID pots, pumps and guns.
+ Successful application of multiple solvent and water reducible primers to a wide variety of substrates and all product and part configurations from simple to complex geometry.
+ Successful application of multiple functional and decorative topcoats to a wide variety of substrates and all product and part configurations from simple to complex geometry.
+ Understanding and maintaining best safety practices in accordance with prescribed directives.
+ The ability and desire to share best practice and technical skills with others as necessary.
Required Skills:
+ Excellent hand/eye coordination, practical skills and attention to detail.
+ Excellent vision whether or not corrected including normal color vision.
+ Good communication skills.
+ Ability to work alone or as a member of a team, good cooperative skills.
+ Ability to utilize necessary safety equipment such as grade D air hoods/masks, Tyvek suits, neoprene gloves and safety eyewear.
+ Ability to stand for prolonged periods with limited movement.
+ Ability to troubleshoot, analyze, and correct basic equipment problems and technical considerations relative to coating defects.
+ Ability to analyze parts/product so as to determine best technique or method for maximizing transfer efficiency of coatings in an effort to minimize waste and to provide for the highest levels of acceptable quality.
+ Ability to successfully apply all common aerospace primers and topcoats in both functional and decorative applications to a wide variety of substrates and product configurations.
Required Experience:
+ Minimum (3) years practical experience specific to the spray application of multiple functional and decorative aerospace primers and topcoats on a variety of substrates and on simple to complex product configurations--- (geometries). Experience should extend to the application of spatter finish textures, dry-film lubricants, conductive coatings, intumescents and Teflon finish systems.
+ NESHAP Operator Certification Training IAW 40 CFR Part 63 Subpart HHHHHH. PCI will provide for relevant training/testing as necessary to ensure compliance).
+ Detailed familiarity with Conventional HVLP paint spray equipment in pressure, gravity and siphon fed variants as well as conventional and airless ID pots, pumps and guns.
Level of Education:
General Standard education including the ability to read and write in English.
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
**Requisition ID:** PRO.036.17

Keywords: Precision Castparts Corp., Seattle, Aerospace Painter - Graveyard Shift, Other, Kent, Washington

Click here to apply!

Didn't find what you're looking for? Search again!


I'm looking for
in category
within


Other Other Jobs


CS Reps
Description: Elite Nationwide Company Seeks Customer Service Reps to talk to our Prospective Clients about our services.
Company: AmeriplanUSA
Location: Vashon
Posted on: 12/18/2017

At Home Reps Needed - PT/FT
Description: Currently interviewing professional individuals to join our award winning team. This is a solid company that offers top
Company: Professional Career Advantage Network
Location: Seattle
Posted on: 12/18/2017

Work From Home Survey Taker $500 - $1500/week (Kent,WA)
Description: Work From Home Survey Taker 500 - 1500/week Kent,WA Survey Taker Positions Available, Get Paid Up To 37 Per HourLocation:
Company: Responsive Media
Location: Kent
Posted on: 12/18/2017


Food Scientist
Description: The Cooking Lab is the publisher of both Modernist Cuisine: The Art and Science of Cooking 2011 and Modernist Cuisine at Home 2012 . Our interdisciplinary team in Bellevue, Washington includes scientists, (more...)
Company: Intellectual Ventures
Location: Bellevue
Posted on: 12/18/2017

Utility Locator
Description: Are you looking to jump start your growth in your professional career How about working for one of the fastest growing underground utility locating companies in the nation If you are a quality conscious, (more...)
Company: USIC
Location: Bellevue
Posted on: 12/18/2017

Relevant Real Estate Professionals
Description: Core Values and Beliefs br br We believe the company has a fundamental responsibility to further the career and quality of life of EVERY team member. We believe that EVERY team member has a fundamental (more...)
Company: Every Door Real Estate
Location: Kirkland
Posted on: 12/18/2017

Utility Locator
Description: Are you looking to jump start your growth in your professional career How about working for one of the fastest growing underground utility locating companies in the nation If you are a quality conscious, (more...)
Company: USIC
Location: Auburn
Posted on: 12/18/2017

Pet Care Associate
Description: Job Description Pet Care Associates are responsible for the health and safety of the live pets in our stores. Pet
Company: PetSmart
Location: Seattle
Posted on: 12/18/2017

Work at Home
Description: Member of Consumer Health Alliance 23 year
Company: AmeriplanUSA
Location: Auburn
Posted on: 12/18/2017

CNC Mill Setup Machinist
Description: JOB SUMMARY Responsible for supporting operators in the training of loading parts, proving programs, operating controls, setting offsets, simple edits, deburring and inspection of quality parts for conformance (more...)
Company: Aero Precision
Location: Seattle
Posted on: 12/18/2017

Log In or Create An Account

Username:
Password:
 

Forgot password?


Find us on Facebook

Find us on LinkedIn

Get the latest Washington jobs by following @recnetWA on Twitter!

Seattle RSS job feeds