Assembler Installer Doors B
Posted on: January 15, 2022
At Boeing, we innovate and collaborate to make the world a better
place. From the seabed to outer space, you can contribute to work
that matters with a company where diversity, equity and inclusion
are shared values. Were committed to fostering an environment for
every teammate thats welcoming, respectful and inclusive, with
great opportunity for professional growth. Find your future with
The Boeing Company is seeking Assembler Installer Doors to join our
teams supporting Boeing Commercial Airplanes in either our Renton
or Everett locations in Washington State! This is an exciting
opportunity to install, rig and adjust door parts and assemblies
into aircraft body structures .
Mechanics in this position install, rig and adjust door parts and
assemblies into aircraft body structures. They may set up and
perform some functional and operational tests of all door
Additional Tasks, Duties and Responsibilities:
Locate work area using drawings which specifies airplane number,
section number, and three-point location.
Obtain and verify kitted (pre-picked) detail parts, standards, and
assemblies were issued correctly.
Ensure that parts issued are effective for the airplane and are
free of visible defects.
If parts are not pre-picked, get parts and ensure that parts
selected are effective for the airplane and are free of visible
Set up assembly tools per tooling instructions or drawing.
Review bar chart or automated time line to determine which job to
work on and obtain appropriate drawings for job.
Drill, ream, countersink close tolerance holes and install
fasteners in parts/assemblies per drawing using correct tools
(e.g., drill motor, rivet gun, torque wrench).
Locate door assembly to airplane structure, install close tolerance
bolt(s) and bushings/spacers for initial door alignment.
Align door assembly to roller fittings, guides and latch tracks.
Check door swing into fuselage. Adjust fit using door rigging
tools. Ensure door has correct fit and fair with fuselage when
closed. Align scuff plate. Shim and trim door for fit using
planers, rotary sanders and hand files.
Install door hardware including warning sensor, pressure/bulb seal,
liner brackets, bustle hardware and other attachments. Check seals
for gaps and light leaks. Check door handle and hinges for proper
angle using a protractor and/or inclinometer and adjust. Perform
seal check on door installation, as required. Utilize vacuum
pressurization equipment on exterior of door and check for leaks
using an ultrasonic leak detector on interior surfaces.
Install personnel evacuation slides, life rafts, and components
(e.g., high pressure and explosive bottles, thrusters, battery), as
required. Assist in slide deployment checks to ensure proper
Coordinate with other ongoing tests on the aircraft. Lock out/Tag
out systems when performing tests. Set up and perform tests of all
door systems (e.g., mechanical and electrical) to ensure related
cockpit instruments are functioning correctly.
Apply sealant, alodine, primer, adhesives, and special
Handle and dispose of hazardous materials in approved manner.
Operate mechanical lifts of various types to locate
parts/assemblies into position or to perform assembly work.
The daily Physical Demands experienced are dependent upon your work
environment, but most Assembler Installers can experience:
Frequent (3-6 Hrs.) Handling (holding, grasping), Kneeling,
Sitting, Standing, Walking.
Working around constant noise.
Flexion/extension (head bent down, head bent back), finger
manipulation, handling, kneeling, bending at the waist, reaching
(overhead), Lying down (back, side, front), rotation of head/neck,
standing, twisting at the waist, walking.
Climbing/balancing (stairs, ladders, poles, scaffolding, inclined
surfaces), Crawling, Crouching (squatting).
Lifting and carrying up to 10-35 pounds.
The position must meet Export Control compliance requirements,
therefore a US Person as defined by 22 C.F.R. 120.15 is required.
US Person includes US Citizen, lawful permanent resident, refugee,
This position is for 2nd shift.
Relocation assistance is not a negotiable benefit for this
position. Candidates must live in the immediate area or relocate at
their own expense.
This is an hourly position governed by the International
Association of Machinist (IAM-751) Collective Bargaining
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and
employees are subject to testing for marijuana, cocaine, opioids,
amphetamines, PCP, and alcohol when criteria is met as outlined in
Current Boeing employees working in Puget Sound and Portland must
submit an Employee Request Transfer (ERT) to be considered in the
eligible candidate pool. Resumes of current Puget Sound Boeing
employees submitted via Careers at Boeing will not be
Boeing is implementing new requirements for employees to be fully
vaccinated from COVID-19 or have an approved reasonable
accommodation based on local legislation in several countries.
Please refer here for current vaccination and/or reasonable
accommodation requirements, and timelines based on location.
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are
made without regard to race, color, religion, national origin,
gender, sexual orientation, gender identity, age, physical or
mental disability, genetic factors, military/veteran status or
other characteristics protected by law.
Keywords: Boeing, Seattle , Assembler Installer Doors B, Professions , Suquamish, Washington
Didn't find what you're looking for? Search again!